*rohs directive 2002/95/ec jan 27 2003 including annex specifications are subject to change without notice. customers should verify actual device performance in their specific applications. *rohs compliant typ. 2.80 0.20 (.110 .008) 2.80 0.20 (.110 .008) 0.90 (.035) typ. 0.90 (.035) typ. 0.90 (.035) 1.35 0.15 (.053 .006) a sru2013 series - shielded smd power inductors features maximum height of 1.3 mm current up to 2.2 a lead free rohs compliant* applications input/output of dc/dc converters power supplies for: portable communication equipment camcorders lcd tvs car radios electrical specifications product dimensions recommended layout electrical schematic general specifications test voltage.....................................0.1 v reflow soldering ...230 ?, 50 sec. max. operating temperature ..-40 ? to +125 ? (temperature rise included) storage temperature..-40 ? to +125 ? resistance to soldering heat ................................260 ? for 10 sec. materials core.....................ferrite dr and ri core terminal ....................................ag/ni/sn rated current ....................ind. drop 35 % typ. at isat temperature rise ......................40 ? max. at rated irms packaging..................1,200 pcs. per reel a dimensions: mm (inches) 1.30 (.051) ref. ref. 1.20 (.047) ref. 1.00 (.039) ref. 1.00 (.039) ref. 1.20 (.047) ref. 0.65 (.026) ref. 2.10 (.083) ref. 0.65 (.026) 1.24 (.049) ref. 3.00 (.118) ref. *rohs compliant inductance 100 khz q test srf rdc i rms i sat bourns part no. ( h) tol. % ref. frequency typ. max. max. typ. (mhz) (mhz) (m ? ) (a) (a) marking sru2013-1r0y 1.0 30 9 7.96 180 65 2.20 1.60 a sru2013-2r2y 2.2 30 10 7.96 100 120 1.45 0.95 c sru2013-3r3y 3.3 30 10 7.96 80 135 1.00 0.86 e sru2013-4r7y 4.7 30 10 7.96 72 220 0.90 0.75 f SRU2013-6R8Y 6.8 30 10 7.96 60 330 0.80 0.60 g sru2013-100y 10 30 12 2.52 40 520 0.67 0.45 h sru2013-150y 15 30 12 2.52 30 850 0.46 0.40 i sru2013-220y 22 30 12 2.52 25 880 0.40 0.35 j sru2013-330y 33 30 12 2.52 20 1820 0.30 0.25 k sru2013-470y 47 30 14 2.52 15 2860 0.25 0.23 l
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. sru2013 series - shielded smd power inductors 03/07 packaging specifications 14.0 (.551) 16.5 (.650) 2.0 0.5 (.079 .020) 50.0 (1.969) 178.0 (7.008) dia. 13.0 0.5 (.512 .020) dia. 13.0 0.5 (.512 .020) dia. 21.0 0.8 (.827 .031) embossed carrier embossed cavity 12.0 (.472) cover tape user direction of feed 200 (7.874) no component no component components 400 (15.748) start 4 (.157) 8 (.315) end a a a a qty: 1,200 pcs. per reel dimensions: mm (inches)
|
